To Deactivate The Timer; To Activate The Timer; Sleep Timer Setting - Philips FWM396/78 User Manual

Clock/Timer
5
Press ALBUM/PRESET +/- (or ALB/
PRESET +/- on the remote control )
repeatedly to set the minute for the timer to
start.
6
Press CLOCK/TIMER (or TIMER on the
remote control ) to store the start time.
●
At the preset time, the selected source will play.
To exit without storing the setting
●
Press Ç on the system.
Notes:
– When the preset time is reached and the
selected disc tray is empty, the next available disc
will be selected. If all the disc trays are not
available, Tuner will be selected automatically.
– During timer setting, if no button is pressed
within 90 seconds, the system will exit timer setting
mode automatically.

To deactivate the TIMER

●
Press TIMER ON/OFF on the remote control.
➜
disappears from the display.

To activate the TIMER

●
Press TIMER ON/OFF on the remote control.
➜
appears on the display.
20

Sleep timer setting

The sleep timer enables the system to switch to
standby mode automatically at a preset time.
1
In active mode, press SLEEP on the remote
control repeatedly to select a preset time.
➜
The selections are as follows (time in
minutes):
15 ™ 30 ™ 45 ™ 60 ™ 90 ™ 120 ™ OFF ™
15 ...
2
When you reach the desired length of time, stop
pressing the SLEEP button.
➜
is shown, except for "OFF" mode.
➜
The sleep timer is now set.
To check the remaining length of time
after sleep timer is activated
●
Press SLEEP once.
To change the preset sleep timer
●
Press SLEEP again while the remaining sleep
timer is shown.
➜
The display will show the next sleep timer
options.
To deactivate the sleep timer
●
Press SLEEP repeatedly until "OFF" is displayed,
or press B (or POWER on the remote
control ).
Note:
– will start flashing when the remaining
length of time after activation of the sleep timer is
less than 1 minute.