8 Other features
Set the alarm timer
This unit can be used as an alarm clock. The
disc, radio or USB is activated to play at a
preset time.
1
Ensure that you have set the clock
correctly (see "Get started" > "Set
clock").
2
Press POWER to switch to standby
mode.
3
Press TIMER .
A prompt to select the source is
»
displayed.
4
Press DISC 1/2/3 or TUN , or USB to
select a source.
5
Press TIMER to confi rm.
The clock digits are displayed and
»
begin to blink.
6
Press
/
to set the hour.
7
Press ALB/PRESET -/+ to set the minute.
8
Press TIMER to confi rm.
The timer is set and activated.
»
To deactivate or re-activate a alarm timer
1
Press TIMER ON/OFF repeatedly.
If the timer is activated,
»
If the timer is deactivated,
»
disappears.
Tip
•
In the MP3 link or AUX mode, the alarm timer
cannot be set.
•
If disc is selected but no audio fi le can be
played, radio is activated automatically.
EN
18
is displayed.
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
1
When the unit is turned on, press SLEEP
repeatedly to select a set period of time
(in minutes).
When sleep timer is activated,
»
displayed.
To deactivate sleep timer
1
Press SLEEP repeatedly until [OFF] (off)
is displayed.
When sleep timer is deactivated,
»
disappears on the display.
Listen to an external device
You can listen to an external audio device
through this unit.
For audio players with headphone jacks
1
Press MP3-LINK / AUX repeatedly to
select the MP3 link source.
2
Connect the supplied MP3 link cable to:
•
the MP3 LINK jack (3.5mm) on the
main unit.
•
the headphone jack on an external
device.
3
Start to play the device (see the device
user manual).
For audio players with red/white audio output
jacks
1
Press MP3-LINK / AUX repeatedly to
select the AUX source.
2
Connect the audio cables (white/red, not
supplied) to:
AUX IN (L/R) jacks on the back
•
the
of the main unit.
•
the AUDIO OUT jacks on an
external device.
3
Start to play the device (see the device
user manual).
is