Connect Power; Prepare The Remote Control; Auto Install Radio Stations - Philips FWM416X/78 User Manual

Connect power

AM ANTENNA
FM ANTENNA
AUX/CDR IN
R L
LOW CH
- +
L
R
L
R
SPEAKERS 6Ω
Caution
•
Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage set on the voltage selector on the back
of the unit.
•
Before connecting the AC power cord, ensure
you have completed all other connections.
Note
•
The type plate is located on the back of the
main unit.
1
If your power supply voltage is 110V-
127V, adjust the voltage selector to 110V-
127V.
2
Connect the AC power cable to:
• the main unit.
• the wall socket.

Prepare the remote control

Caution
•
Risk of explosion! Keep batteries away from
heat, sunshine or fi re. Never discard batteries
in fi re.
To insert the remote control battery:
1
Open the battery compartment.
2
Insert 2 AAA batteries (not supplied)
with correct polarity (+/-) as indicated.
3
Close the battery compartment.
3
1
2
Note
•
If you are not going to use the remote control
for a long time, remove the batteries.
•
Do not use old and new or different types of
batteries in combination.
•
Batteries contain chemical substances, so they
should be disposed of properly.

Auto install radio stations

When you connect power and no radio
stations are stored, the unit automatically begins
to store radio stations.
1
Connect the unit to the power supply.
[AUTO INSTALL - PRESS PLAY] (auto
»
install - press the PLAY button) is
displayed.
2
Press on the main unit to start
installation.
[AUTO] (auto) is displayed.
»
The unit automatically stores radio
»
stations with suffi cient signal strength.
When all the available radio stations
»
are stored, the fi rst preset radio station
is broadcast automatically.
EN 11