Siemens SIMATIC S5 Manual page 182
Ip 265 high speed sub control
Hide thumbs
Also See for SIMATIC S5:
- Manual (396 pages) ,
- Equipment manual (197 pages) ,
- Operating instructions manual (43 pages)
Table of Contents
Advertisement
Testing and Simulation with COM 265
Testing the electrical continuity of the outputs
Move the cursor to the relevant output.
Press <F3> "Value".
The signal state changes from "0" to "1".
Observe the responses of the actuators of the process I/O.
Testing the electrical continuity of the inputs
Initiate a signal state change by de-energizing one of the actuators of the process I/O.
Observe the responses of the signal state display for the relevant input on the programmer
screen.
10-24
IP 265
EWA 4NEB 812 6130-02a
Advertisement
Chapters
Table of Contents
