Sony Bravia FW-85BZ35F Reference Manual page 4

• When lifting or moving the LCD Monitor, hold it firmly from the
bottom.
FW-85BZ35F
FW-75/65/55BZ35F
FW-49/43BZ35F
• When transporting the LCD Monitor, do not subject it to jolts or
excessive vibration.
• When transporting the LCD Monitor for repairs or when moving,
pack it using the original carton and packing material.
Ventilation
• Never cover the ventilation holes or insert anything in the
cabinet.
• Leave space around the LCD Monitor as shown below.
• It is strongly recommended that you use a Sony Wall-Mount
Bracket in order to provide adequate air circulation.
Installed on the wall
10 cm
Leave at least this space around the set.
4
GB
30 cm
10 cm
10 cm
Installed with stand
10 cm
Leave at least this space around the set.
• To ensure proper ventilation and prevent the collection of dirt or
dust:
 Do not lay the LCD Monitor flat, install upside down,
backwards, or sideways.
 Do not place the LCD Monitor on a shelf, rug, bed or in a
closet.
 Do not cover the LCD Monitor with a cloth, such as curtains, or
items such as newspapers, etc.
 Do not install the LCD Monitor as shown below.
Air circulation is blocked.
Wall
AC power cord (mains lead)
Handle the AC power cord (mains lead) and outlet (mains socket)
as follows in order to avoid any risk of fire, electric shock or
damage and/or injuries:
• The shape of AC power plug (mains plug), which is supplied
with the LCD Monitor, varies depending on the region. Be sure
to connect the appropriate supplied AC power cord (mains lead)
with the plug that fits into the AC power outlet (mains socket).
• Use only Sony supplied AC power cords (mains lead), not those
of other brands.
• Insert the plug fully into the AC power outlet (mains socket).
• Operate the LCD Monitor on a 110 V – 240 V AC supply only
(except models with supplied AC adapter).
• Operate the LCD Monitor on a 100 V – 240 V AC supply only
(models with supplied AC adapter only).
• When wiring cables, be sure to unplug the AC power cord
(mains lead) for your safety and take care not to catch your feet
on the cables.
• Disconnect the AC power cord (mains lead) from the AC power
outlet (mains socket) before working on or moving the LCD
Monitor.
• Keep the AC power cord (mains lead) away from heat sources.
• Unplug the AC power plug (mains plug) and clean it regularly. If
the plug is covered with dust and it picks up moisture, its
insulation may deteriorate, which could result in a fire.
Note
• Do not use the supplied AC power cord (mains lead) on any
other equipment.
• Do not pinch, bend, or twist the AC power cord (mains lead)
excessively. The core conductors may be exposed or broken.
• Do not modify the AC power cord (mains lead).
• Do not put anything heavy on the AC power cord (mains lead).
• Do not pull on the AC power cord (mains lead) itself when
disconnecting the AC power cord (mains lead).
• Do not connect too many appliances to the same AC power
outlet (mains socket).
• Do not use a poor fitting AC power outlet (mains socket).
30 cm
10 cm
6 cm
Wall