Table of Contents
Advertisement
2
Installing the Wheel Weight
Kit (Optional)
Parts needed for this procedure:
1
Wheel Weight Kit (sold separately)
Procedure
Installing wheel weights can improve traction on
the machine when using the blower; refer to the
Installation Instructions for the Wheel Weight Kit.
3
Positioning the Caster
Wheels
No Parts Required
Procedure
For both casters, remove the nut and bolt, move the
caster to the front position, and install the nut and bolt
(Figure
3). Torque to 91 to 113 N∙m (67 to 83 ft-lb).
1. Nut and bolt
Figure 3
4
Removing the Right Fan
Guard
No Parts Required
Procedure
1.
Remove the fuel tank; refer to the Operator's
Manual for the machine.
2.
Remove and retain the 2 bolts, 2 nuts, and the
right fan guard
1. Nut (3/8 inch)
2. Bolt (3/8 x 1-1/4 inch)
3.
Install the bolts and nuts you removed and
torque to 41 to 49 N∙m (30 to 36 ft-lb).
4.
Install the fuel tank.
g230693
6
(Figure
4).
Figure 4
3. Right fan guard
g246823
Advertisement
Table of Contents
