When using a child restraint sys-
tem (for India)
When installing a child restraint
■
system to a passenger seat
For the safety of a child, install child
restraint systems to a rear seats. When
installing child restraint system to a
front passenger seat is unavoidable,
adjust the passenger seat as follows
and install the child restraint system.
Move the front seat fully rearward.
Adjust the seatback angle to the
most upright position.
When installing a forward-facing child
seat, if there is a gap between the child seat
and the seatback, adjust the seatback
angle until good contact is achieved.
Adjust the front of the seat cushion
to the uppermost position.
Adjust the seat height to the upper-
most position.
Adjust the lumbar support to the
lowest position.
Adjust the pelvic support
lowest position.
If the head restraint interferes with
the child restraint system installa-
tion and the head restraint can be
removed, remove the head restraint.
Otherwise, put the head restraint in
the upper most position.
*
: If equipped
When installing a child restraint
■
system to a reclining type rear seat
(if equipped)
When using a child restraint system in
an outer rear seat, adjust the seat as
follows and install the child restraint
system.
Adjust the seatback angle to the
most upright position.
When installing a forward-facing child
seat, if there is a gap between the child seat
and the seatback, adjust the seatback
angle until good contact is achieved.
If the head restraint interferes with
the child restraint system installa-
tion and the head restraint can be
*
to the
removed, remove the head restraint.
Otherwise, put the head restraint in
the upper most position.
83
1-2. Child safety
1