Lexus ES 300h Owner's Manual page 69

68
1-2. Child safety
 When installing a child restraint in
the rear seats, adjust the front seat
so that it does not interfere with the
child or child restraint system.
 When installing a child seat with
support base, if the child seat inter-
feres with the seatback when latch-
ing it into the support base, adjust
the seatback rearward until there is
no interference.
 If the seat belt shoulder anchor is
ahead of the child seat belt guide,
move the seat cushion forward.
 When installing a junior seat, if the
child in your child restraint system is
in a very upright position, adjust the
seatback angle to the most comfort-
able position. And if the seat belt
shoulder anchor is ahead of the
child seat belt guide, move the seat
cushion forward.
Child restraint system compati-
bility for each seating position
(for Argentina and Brazil)
Child restraint system compatibil-
■
ity for each seating position
Compatibility of each seating position
with child restraint systems (P.69)
displays the type of child restraint sys-
tems that can be used and possible
seating positions for installation using
symbols. Also, the recommended child
restraint system that is suitable for your
child can be selected.
Otherwise, check "Recommended
child restraint systems and Compatibil-
ity table" for recommended child
restraint systems. (P.72)
Check the selected child restraint sys-
tem together with the following
"Before confirming the compatibility of
each seating position with child
restraint systems".
Before confirming the compatibil-
■
ity of each seating position with
child restraint systems
1 Checking the child restraint system
standards.
Use a child restraint system that
conforms to UN(ECE) R44
*1, 2
UN(ECE) R129 .
The following approval mark is dis-
played on child restraint systems
which are conformed.
Check for an approval mark
*1
or