76
1-2. Child safety
Child restraint system fixed with
an ISOFIX lower anchorage
ISOFIX lower anchorages (ISO-
■
FIX child restraint system)
Lower anchorages are provided for the
outboard rear seats. (Marks displaying
the location of the anchorages are
attached to the seats.)
Installation with ISOFIX lower
■
anchorage (ISOFIX child restraint
system)
Install the child restraint system in
accordance to the operation manual
enclosed with the child restraint sys-
tem.
If the child restraint system on hand is
not within the "universal" category (or
the necessary information is not in the
table), refer to the "Vehicle List" pro-
vided by the child restraint system
maker for various possible installation
positions, or check the compatibility
after asking the retailer of the child
seat. (P.59, 64, 68)
1
Vehicles with reclining type rear
seat: Adjust the seat
If there is a gap between the child seat and
the seatback, adjust the seatback angle
until good contact is achieved. (P.57)
2
Remove the cover.
3
Check the positions of the exclu-
sive fixing bars, and install the child
restraint system to the seat.
The bars are installed in the clearance
between the seat cushion and seatback.
4
After installing the child restraint
system, rock it back and forth to
ensure that it is installed securely.
(P.75)
When using a "MIDI 2" (for Argentina
■
and Brazil)
Adjust the support leg and ISOFIX connec-