Lexus ES 300h Owner's Manual page 275

Hide thumbs Also See for ES 300h:
Table of Contents

Advertisement

274
4-5. Using the driving support systems
tance control mode does not function
correctly due to a dirty radar, etc.
1
With the cruise control off, press
and hold the cruise control main
switch for 1.5 seconds or more.
Immediately after the switch is pressed, the
dynamic radar cruise control indicator will
come on. Afterwards, it switches to the
cruise control indicator.
Switching to constant speed control mode
is only possible when operating the switch
with the cruise control off.
2
Accelerate or decelerate, with
accelerator pedal operation, to the
desired vehicle speed (at or above
approximately 30 km/h [20 mph])
and press the -SET switch to set the
speed.
Cruise control "SET" indicator will come
on.
The vehicle speed at the moment the
switch is released becomes the set speed.
Adjusting the speed setting: P.271
Canceling and resuming the speed setting:
P.273
Dynamic radar cruise control with full-
speed range can be set when
The shift lever is in D.
The desired set speed can be set when
the vehicle speed is approximately 30
km/h (20 mph) or more. (However, when
the vehicle speed is set while driving at
below approximately 30 km/h [20 mph],
the set speed will be set to approximately
30 km/h [20 mph].)
Accelerating after setting the vehicle
speed
The vehicle can accelerate by operating the
accelerator pedal. After accelerating, the
set speed resumes. However, during vehi-
cle-to-vehicle distance control mode, the
vehicle speed may decrease below the set
speed in order to maintain the distance to
the preceding vehicle.
When the vehicle stops while follow-up
cruising
Pressing the +RES switch while the vehi-
cle ahead stops will resume follow-up
cruising if the vehicle ahead starts off
within approximately 3 seconds after the
switch is pressed.
If the vehicle ahead starts off within 3 sec-
onds after your vehicle stops, follow-up
cruising will be resumed.
Automatic cancelation of vehicle-to-
vehicle distance control mode
Vehicle-to-vehicle distance control mode is
automatically canceled in the following situ-
ations.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents