Lexus ES 300h Owner's Manual page 126

sensor before setting the alarm, as it
will respond to movement inside the
vehicle.
1 Turn the power switch off.
2
Press the intrusion sensor and tilt
sensor cancel switch.
Press the switch again to re-enable the
intrusion sensor and tilt sensor.
Each time the intrusion sensor and tilt sen-
sor are canceled/set, a message will be
shown on the multi-information display in
the instrument cluster.
Canceling and automatic re-enabling of
■
the intrusion sensor and tilt sensor
● The alarm will still be set even when the
intrusion sensor and tilt sensor are can-
celed.
After the intrusion sensor and tilt sensor
●
are canceled, pressing the power switch
or unlocking the doors using the entry
function or wireless remote control will
re-enable the intrusion sensor and tilt
sensor. (Except for Malaysia, South
Africa, Egypt, Morocco and India, the
mechanical key can also be used.)
The intrusion sensor and tilt sensor will
●
automatically be re-enabled when the
alarm system is deactivated.
■ Intrusion sensor detection consider-
ations
The sensor may trigger the alarm in the fol-
lowing situations:
● People or pets are in the vehicle.
1-4. Theft deterrent system
● A window or the moon roof is open.
In this case, the sensor may detect the fol-
lowing:
• Wind or the movement of objects such as
leaves and insects inside the vehicle
• Ultrasonic waves emitted from devices
such as the intrusion sensors of other
vehicles
• The movement of people outside the
vehicle
Unstable items, such as dangling acces-
●
sories or clothes hanging on the coat
hooks, are in the vehicle.
● The vehicle is parked in a place where
extreme vibrations or noises occur, such
as in a parking garage.
125
1