Siemens SIPROCESS GA700 Compact Operating Instructions page 86

Technical specifications
10.2 General technical specifications
Table 10- 8
Electrical characteristics
Auxiliary power supply
Power consumption
EMC interference im-
munity (electromagnetic
compatibility)
during operation:
Electrical safety
Power unit cable
Table 10- 9
Purging gas pressure
Continuous (recommended)
Continuous (maximum)
Transient (maximum)
Table 10- 10 Wall housing: Electrical inputs and outputs
Electrical inputs and outputs
Digital outputs (DO)
Digital inputs (DI)
Ethernet interface (bottom)
Service interface (inside at PU)
86
Wall housing: Electrical characteristics
with one and/or
two OXYMAT 7 /
ULTRAMAT 7
units
with one or two
CALOMAT 7
units
Wall housing: Purging gas pressure
100 to 240 V AC (nominal range of use 85 to 264 V)
50 to 60 Hz (nominal range of use 47 to 63 Hz)
Max. 280 VA
in accordance with the standard requirements of
NAMUR NE21 (05/2006) and EN 61326-1 (2013)
in accordance with the standard requirements
NAMUR NE21 (05/2006) and EN 61000-6-
2:2005
in accordance with EN 61010-1, overvoltage category II
Max. Ø 10 mm , max. 3 x 2.1 mm
2
30 hPa above ambient
< 100 hPa above ambient pressure
165 hPa above ambient pressure
8, with changeover contacts, parameters can be freely
assigned, e.g. for measuring range identification;
max. load: 24 V AC/DC/1.7 A (total load for all 8 relay out-
puts in continuous operation max. 160 W), floating, non-
sparking
8, designed for 24 V, isolated, freely parameterizable, e.g.
for autoranging
Ethernet RJ 45, 100 MBit
Ethernet RJ 45, 100 MBit
Compact Operating Instructions, 05/2018, A5E35134047-03
No
2
Devices in explosion-proof design