Part Names - YAMADA 140 Series Instruction Manual

1. Part names

1.1 Part names
Fig. 1 and Fig. 2 show the names of each part used in the instructions in this manual. Use them as a reference.
Lift (DAL)
Lift rail (two parallel rails)
Eye nut
Rc1/2 Air inlet
Pump bracket
Mounting plate
(attached under air motor)
Air valve for pump
Operation panel
(see Fig. 2)
Bleeder valve
※140 Type only
Air release plug
Inductor plate
Angle
Fig. 1 Part names
1
Air motor
Lower pump
Lift air cylinder
Air release hole (socket attached
under air release plug)