Table of Contents
Advertisement
④Check for loose bolts and nuts
Check bolts and nuts according to the following procedures:
- Completely shut down the pump and lift by disconnecting from
the air source, for example.
- Ensure that all visible bolts and nuts on the pump and lift cannot
be loosened by hand.
⑤Clean and lubricate lift rail
Clean and lubricate according to the following procedures:
- Shut off the lift.
- Wipe off any visible contaminated grease on the lift rail.
- Apply clean grease (lithium soap based grease: No.1) to slide
rail grooves. (Fig. 10)
- Move the lift to clean and lubricate the other section of the rail.
⑥Overhaul pump
Pump needs to be overhauled triennially. Please contact the retail
store where you purchased your pump or our business office for
overhaul. Earlier overhaul is recommended depending on use
frequency and deterioration degree.
10
Lift rail
Bolt
Slide rail groove
Fig. 10 Where to apply grease on lift rail
Advertisement
Table of Contents
