Firmware Upgrade
Configuration Setting
Factory Default
System Log
System Reboot
4.3.1 System Information
This section displays system information of Ultra PoE Managed Injector Hub as the screen in
4-3-1
describes the system information of the Ultra PoE Managed Injector Hub.
Object
System Name
MAC Address
Software Version
Build Time
Hardware Version
Attain IP Protocol
IP Address
Subnet Mask
Gateway
System Date
System UpTime
Table 4-3-1: Descriptions of the System Information Objects Screen
Allow to upgrade the latest firmware in the future.
Allow to back up or restore system configuration.
Allow to reset system to factory default setting.
Allow to enable system log and to record system log.
4.3.8.
Allow to reboot system.
Figure 4-3-1: System Information Web Page Screen
Description
Displays the Ultra PoE Managed Injector Hub model name.
Displays the MAC address of Ultra PoE Managed Injector Hub.
Displays the current firmware version of Ultra PoE Managed Injector Hub.
Displays the firmware build time.
Displays the hardware version of Ultra PoE Managed Injector Hub.
Displays the currently attained IP protocol of Ultra PoE Managed Injector Hub.
Displays the current IP address of Ultra PoE Managed Injector Hub.
Displays the current subnet mask address of Ultra PoE Managed Injector Hub.
Displays the current gateway address of Ultra PoE Managed Injector Hub.
Displays the current system date of Ultra PoE Managed Injector Hub. The system
date will be correct if NTP function is enabled and the Hub is connected to
Internet.
Displays when the system will start up.
30
User's Manual of UPOE-800G / UPOE-1600G
Explained in section
Explained in section
Explained in section
Explained in section
4.3.9.
4.3.5.
4.3.6.
4.3.7.
Explained in section
Figure 4-3-1
appears.
Table