Assembly And Adjustments - DeWalt DW060 Instructions Manual

• If the warnings are in a foreign language, proceed as follows:
– Draw the required label from the sheet.
– Carefully place the label over the foreign language.
– Press the label in place.

ASSEMBLY AND ADJUSTMENTS

WARNING! Do not place the laser in a position which may
cause anyone to intentionally or unintentionally stare into
the laser beam. Serious eye injury may result from staring at the
beam.
Replacing batteries (fi g. C)
The attachment uses batteries of type LR14 (C).
• Loosen and remove the screws (5).
• Remove the battery compartment cover (6).
• Take out the battery holder (7).
• Replace the batteries (13). Make sure the new batteries are placed as
indicated.
• Replace the battery holder (7).
• Put the battery compartment cover in place.
• Replace the screws and tighten them.
WARNING: When replacing batteries, always replace the
complete set. Do not mix old batteries with new ones.
Preferably use alkaline batteries.
Setting up the tool (fi g. D1–D3)
The tool facilitates various set-ups, making it useful for several applications.
Floor set-up (fi g. D1, D2)
• Place the tool on a relatively smooth and level surface.
Wall set-up (fi g. D3)
• Hold the tool with both hands against a relatively smooth and level surface.
E N G L I S H
37