Husqvarna Viking Platinum Q 165 User Manual page 42

To set the quilti ng alarm
Aft er you enable the quilti ng alarm, the ti me begins to count down. This alarm measures elapsed ti me,
not machine quilti ng ti me. The example below shows 57 minutes and 23 seconds are remaining before the
alarm will sound.
1. Specify the amount of ti me that will elapse before the alarm will go off . Fine tune the alarm setti ng by
pressing the plus (+) or minus (–) butt ons which changes the alarm setti ng by one minute at a ti me.
2. Touch the alarm icon to turn on the quilti ng alarm. When the ti me has elapsed, an alarm will sound.
Touch the alarm icon to turn on or off the quilti ng
alarm. It appears blue when enabled.
Shows the current quilti ng
alarm setti ng.
Press the plus (+) or minus
(—) butt ons to change the
alarm setti ng.
powerquilter 1650 Quilti ng Machine User's Guide
| 41