Husqvarna Viking Platinum Q 165 User Manual page 24

To adjust the bobbin tension
• Make the bobbin tension adjustment using
the screw in the center of the tension spring.
Turn clockwise to tighten and counterclockwise
to loosen the bobbin tension. Make tiny
adjustments to the bobbin tension and
test again.
To insert the bobbin case into the machine
1. Move the needle to the up position. Turn off the power to the machine.
2. Place the bobbin in the bobbin case so that the thread pulls off clockwise when viewing the
open side.
3. Slide the thread through the slot and under the tension spring, leaving 5 to 6 inches of thread
hanging loose.
4. To fit the bobbin case onto the hook spindle
in the machine, orient the bobbin case as
shown in the photo with the alignment notch to
the right. Push the bobbin case inward until it
clicks into place.
 NOTE: Do not insert the bobbin case into
the machine by lifting the lever on bobbin
case. Use the lever only for removing the
bobbin case.
powerquilter 1650 Quilting Machine User's Guide
| 23