Formatting A Usb Flash Drive - Yamaha PSR-I400 Owner's Manual

Formatting a USB Flash Drive

The Format operation lets you prepare commercially
available USB Flash Drive for use with this instru-
ment is called "Format."
1
Hold the [FUNCTION] button for longer
than a second to call up the File Control
display.
2
Use the CATEGORY [+] and [-] buttons to
call up "Format?."
3
Press the [0/EXECUTE] button.
A confirmation message will appear. To cancel the
operation, press the [-/NO] button.
4
Press the [0/EXECUTE] button again or
the [+/YES] button to execute the Format
operation.
After a while, a message indicating completion of
the operation appears, and the "USER FILES"
folder will be created on the root directory in the
USB Flash Drive.
NOTICE
• The Format operation cannot be cancelled during
execution. Never turn off the power or disconnect the
USB Flash Drive during the operation. Doing so may
result in data loss.
5
Press the [FUNCTION] button to exit
from the File Control display.
Format?
USB Flash Drive Operations
Recognizable file location in the USB
Flash Drive for Song playback (page 24)
USB Flash Drive (Root)
Song
File
Song
File
Song
File
Song
File
IMPORTANT
• In order to play data copied to a USB Flash Drive from
a computer or other device, the data must be stored
either in the USB Flash Drive's root directory or a first-
level/second-level folder in the root directory. Data
stored in third-level-folders created inside a second-
level folder cannot be selected and played by this
instrument.
NOTE
• If playback of an external Song (created via a different
instrument or computer) produces the distorted sound,
decrease the Song Volume (page 47) to reduce the dis-
tortion then adjust the Master Volume (page 14).
PSR-I400 Owner's Manual
Can be selected/
played.
Cannot be
selected/played.
53