Table of Contents
Advertisement
Using a USB Flash Drive
Formatting a USB Flash Drive
NOTICE
Executing the Format operation will delete all data in the USB flash drive. Before formatting, save important data to a computer
or another storage device.
1
Connect the USB flash drive to the [USB TO DEVICE] terminal.
2
While holding [FUNCTION] and [
"
" appears on the display for a while, then "
For
cancel this operation, press [-] here.
3
Press [+] to execute the Format operation.
Dashes appear in succession on the display, indicating that Formatting is in pro-
cess. When the operation is completed, "
NOTICE
While dashes appear in succession on the display, never turn off the power or discon-
nect the USB flash drive. Doing so may corrupt the data on the USB flash drive, and the
Format operation will not be executed properly.
Managing Files on a USB Flash Drive
When organizing files on a USB flash drive using a computer, etc., make sure to place External Songs
only in the first, second, or third hierarchical folder level. This instrument will not be able to select or
play songs from any level lower than that. This instrument can recognize up to 100 MIDI Songs and 100
Audio Songs on a USB flash drive as External Songs.
USB flash
32 • N1X
Owner's Manual
/
] (Play/Pause), press [REC].
>
o
" appears on the display.
End
drive
First level
Second level
Song file
User Song
USER
(MIDI)
FILES
USERSONG
folder
XX.mid
User Song
(audio)
USERAUDIO
XX.wav
Song folder
Song file
Song folder
" appears. If you wish to
n Y
Third level
Fourth level
These Songs
are playable.
Song file
These Songs
are not playable.
Song folder
Song file
Song folder
NOTE
When you execute a Song Recording (page
29), Copy (page 33) or Delete (page 30)
operation, a "
UnF
" prompt may appear
on the display, indicating that the USB flash
drive has not been formatted yet. In this
case, execute the Format operation by pro-
ceeding from Step 2 as described at left.
Advertisement
Table of Contents
