Exiting From A File Control Display - Yamaha PSR-I400 Owner's Manual

Exiting from a File Control display

To exit from the File Control display, press the
[VOICE], [STYLE], [RIYAZ], [SONG], [FUNC-
TION], or [HARMONIUM/PIANO] button.
You can also exit from the File Control function mode
as follows:
1
Use the CATEGORY [+] and [-] buttons to
call up "Exit?."
2
Press the [0/EXECUTE] button to exit
from the File Control display.
Exit?
USB Flash Drive Operations
Message
Indicates that the file control function is cur-
Can't Use rently unavailable since the media is being
accessed.
Indicates the specified job completion such as
Complet.
data saving and transmission.
Displayed when the user Song contains illegal
Data Err
data.
Displayed when saving data cannot be exe-
Disk Ful
cuted since the media memory becomes full.
Displayed when a file error or operational error
Error
occurs.
Indicates that SMF Songs cannot be dis-
File Ful played since the total number of files exceeds
the capacity.
no data There is no data to save in the flash memory.
There is no file to load or delete from the
no file
media.
Communication with the USB device has been
shut down because of the overcurrent to the
USB device. Disconnect the device from the
[USB TO DEVICE] terminal, then turn on the
0ur
power of the instrument.
Displayed when trying to save or delete data
Protect on a protected media, or format a protected
media. Set protect to off and try again.
Displayed when connecting an unformatted
UnFormat
media.
USB Flash Drive save, delete, and format
operations cannot be performed when the
UseAdpt
instrument is being powered from battery. Use
an AC adaptor.
Comment
PSR-I400 Owner's Manual
59