Dw710; (Volt) - DeWalt DW710 Manual

E N G L I S H
TABLE TOP MITRE SAW DW710
Congratulations!
You have chosen a D WALT Power Tool. Years of experience, thorough
E
product development and innovation make D
reliable partners for professional Power Tool users.
Table of contents
Technical data
Declaration of conformity
Safety instructions
Package contents
Description
Electrical safety
Mains plug replacement (U.K. & Ireland only)
Using an extension cable
Assembly and adjustment
Instructions for use
Maintenance
Guarantee
Technical data
Voltage
Power input
Blade diameter
Blade bore
Max. blade speed
Max. cross-cut capacity at 90°
Max. mitre capacity 45°
Max. depth of cut 90°
Max. depth of bevel cross-cut 45°
Mitre (max. positions)
Bevel (max. positions)
0° mitre
Resulting width at max. height 135 mm
Resulting height at max. width 50 mm
45° mitre
Max. width at max. height 90 mm
Max. height at max. width 100 mm
45° bevel
Max. width at max. height 40 mm
Resulting height at max. width 135 mm
Automatic blade brake time
Weight
Fuses:
Europe
U.K. & Ireland
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or damage to the
tool in case of non-observance of the instructions in this
manual.
Denotes risk of electric shock.
Sharp edges.
en - 1
WALT one of the most
E

DW710

V 230
W 1000
mm 250
mm 30
min 2850
mm 125
mm 85
mm 50
mm 35
left 48°
right 48°
left 45°
right 0°
mm 45
mm 125
mm 50
mm 42
mm 100
mm 32
s < 10.0
kg 24
230 V tools 10 Amperes, mains
230 V tools 13 Amperes, in plugs
Declaration of conformity
DW710
D WALT declares that these Power Tools have been designed in
E
compliance with: 89/392/EEC, 89/336/EEC, 73/23/EEC, EN 61029-1,
prEN 61029-2-11, EN 55014, EN 55014-2, EN 61000-3-2 & EN 61000-3-3.
en - 1
en - 1
Level of sound pressure according to 86/188/EEC & 89/392/EEC,
en - 1
en - 3 measured according to prEN 61029-2-11:
en - 3
en - 3
L (sound pressure)
en - 3
pA
L (acoustic power)
en - 3
WA
* at the operator's ear
en - 3
en - 5
Take appropriate measures for the protection of hearing if the
en - 5
sound pressure of 85 dB(A) is exceeded.
en - 6
Weighted root mean square acceleration value according to
prEN 61029-2-11:
TÜV Rheinland
Sicherheit und Umweltschutz GmbH
Am Grauen Stein
D-51105 Köln
Germany
Director Engineering and Product Development
Horst Großmann
D WALT, Richard-Klinger-Straße 40,
E
D-65510, Idstein, Germany
Safety instructions
When using Power Tools, always observe the safety regulations
applicable in your country to reduce the risk of fire, electric shock and
personal injury. Read the following safety instructions before attempting
to operate this product. Keep these instructions in a safe place!
General
1 Keep work area clean
Cluttered areas and benches can cause accidents.
2 Consider work area environment
Do not expose Power Tools to humidity. Keep work area well lit. Do
not use Power Tools in the presence of inflammable liquids or gases.
3 Guard against electric shock
Prevent body contact with earthed surfaces (e.g. pipes, radiators,
cookers and refrigerators).
For use under extreme conditions (e.g. high humidity, when metal
swarf is being produced, etc.) electric safety can be improved by
inserting an isolating transformer or a (FI) earth-leakage circuit-breaker.
DW710
dB(A)* 90.8
dB(A) 98.8
DW710
<2.5 m/s
Cert. No.
BM 9610641-01
2
12