Outdoor Unit Installation - Trane MCC Series Installation Manual

Cassette split system, 1-5 tons 18,000 - 38,000 btu underceiling type

Hide thumbs Also See for MCC Series:

Owner's manual (30 pages)

Installation operation & maintenance (32 pages)

Table Of Contents

Table of Contents

Where to install Outdoor

Unit

• The foundation must be solid

enough to bear the weight and

vibration of the unit.

• The space around the unit is

adequate for ventilation.

• The location is not close to any

flamable gases.

• The location is sufficiently isolated

so that the running noise and the

hot exhaust air do not disturb the

users or their neighbors.

• Easy access to check and to

maintain.

• Ensure the spaces indicated by

arrows from the wall, ceiling, fence,

or other obstacles.

Caution

Installation in the following places may

cause problems. If it is unavoidable to

use such places, consult with your

distributor or dealer.

• A place with machine oil.

• A saline place such as a place very

close to a seashore.

• A place with sulphur gas.

• A place where high-frequency

waves are generated by radio

equipment, welder and medical

equipment.

Remote Control

Installation

Locate and attach the wireless

remote control as follows:

• Do not place the remote control

near heat sources or expose to

the direct rays of the sun.

• Do not expose the remote control

to the indoor unit's supply air

stream.

• Do not place in a confined space.

• Attach the remote control holder

as shown in figure 8.

MCC-SVN01A-EN