Electrical Installation Of The Central Apartment Unit; Installation Regulations; Connection Terminals / Wiring - Siemens Synco 900 Mounting And Commissioning

Hide thumbs Also See for Synco 900:

Table of Contents

Replace the electronics section

Insert the electronics sec-

tion at an angle of about 45°

in the base (left and right).

Then, swing it downward

until it engages.

The central apartment unit

is now ready for commis-

sioning.

Electrical installation of the

central apartment unit

• Comply with local regulations (installation, etc.).

• Only qualified staff may carry out electrical installations.

• Prior to installation, disconnect the central apartment unit

from power!

• The connection terminals for low-voltage and mains voltage

are arranged on different sides of the unit.

• When wiring the unit, satisfy requirements of safety class

INSIGHT.

• Provide cable strain relief.

The connection terminals can be accessed from the front of the base.

Connect the low-voltage and mains voltage cables to the respective

terminals on the base.

Run the cables under the straps provided and – after connection –

ensure strain relief with the help of cable ties.

12/88

Siemens

Building Technologies

Synco 900

Mounting and installation

CE1C2707en

05.07.2007

Table of Contents