Panasonic PT-D10000U Service Manual page 15

Error-code Contents
U51 Lamp 1 going out
U52 Lamp 2 going out
U53 Lamp 3 going out
U54 Lamp 4 going out
U51 Lamp 1 lighting failure
U52 Lamp 2 lighting failure
U53 Lamp 3 lighting failure
U54 Lamp 4 lighting failure
U70 Air filter unit not installed
U71 Lamp 1 not installed
U72 Lamp 2 not installed
U73 Lamp 3 not installed
U74 Lamp 4 not installed
U81 AC power supply voltage drop
warning (less than 90 V)
U91 Lamp unit cover is not closed
H11 Thermosensor disconnected (IN)
H12 Thermosensor disconnected (OPT)
H13 Thermosensor
(OUT)
H18 Airflow sensor disconnected
U04 Air filter is blocked
H01 Internal clock battery replacement
FE1 Fan error 1: P-UNIT FAN
FE2 Fan error 2: LAMP1 FAN
FE3 Fan error 3: LAMP2 FAN
FE4 Fan error 4: LAMP3 FAN
FE5 Fan error 5: LAMP4 FAN
FE6 Fan error 6: BALLAST1 FAN
FE7 Fan error 7: BALLAST3 FAN
FE8 Fan error 8: RADIATOR FAN
FE9 Fan error 9: EXAUST FAN C
FF0 Fan error 10: EXAUST FAN L
FF1 Fan error 11: EXAUST FAN R
FF2 Fan error 12: R-DMD FAN
FF3 Fan (Module) error 13: G-LIQUID
COOLING
FF4 Fan (Module) error 14: B-LIQUID
COOLING
FF5 Fan error 15: C-PRISM FAN
FF6 Fan error 16: L-PRISM FAN
FF7 Fan error 17: BALLAST2 FAN
FF8 Fan error 18: BALLAST4 FAN
F11 Shutter error
F12 Dynamic iris error
F13 Air filter unit error
F21 2.5 V DC error
F22 3.3 V DC error
F23 5.0 V DC error
F41 Lamp 1 memory error
F42 Lamp 2 memory error
F43 Lamp 3 memory error
F44 Lamp 4 memory error
FP1 Lamp 1 PFC error
FP2 Lamp 2 PFC error
FP3 Lamp 3 PFC error
FP4 Lamp 4 PFC error
F91 FPGA1 configuration error
F92 FPGA2 (SXGA+)
error
F92 FPGA2 (FULL-HD) configuration
error
Shutdown
*2
Lamp goes out after turning on.
*2
*2
*2
*2
Lamp ignition failure
*2
*2
*2
Air filter unit is not installed.
Lamp is not installed (The lamp memory cannot
be read.)
AC power supply voltage drops.
Lamp unit cover is not closed for 1 second or
longer.
Intake air thermosensor is disconnected.
Optical module thermosensor is disconnected.
disconnected Lamp
disconnected.
Airflow sensor is disconnected.
The air filter accumulates dust.
The date is before December 31, 2005 or after
January 1, 2036.
The fan stops for 5 seconds or longer.
Shutter error
Dynamic iris error
Air filter cleaning processing time-out
2.5 V DC error
3.3 V DC error
5.0 V DC error
*2
Lamp EEPROM is abnormal.
*2
*2
*2
*2 Lamp 1 PFC error
*2 Lamp 2 PFC error
*2 Lamp 3 PFC error
*2 Lamp 4 PFC error
A-P.C.Board is abnormal.
configuration FH-Module is abnormal.
Error display condition
surroundings thermosensor
15
PT-D10000U / PT-D10000E / PT-DW10000U / PT-DW10000E
Remarks
LAMP monitor blinks 3 times in
red.
LAMP monitor blinks 3 times in
red.
Confirms the installation when
turning on the power.
LAMP monitor blinks 3 times in
red.
If the cover is not closed when
turning on the power, it does
not turn on.
is
If this error occurs, the date is
reset on 00:00:00, January 1,
2006.
Power unit fan
Lamp fan 1
Lamp fan 2
Lamp fan 3
Lamp fan 4
Ballast fan 1
Ballast fan 3
Radiator fan
Exhaust fan (C)
Exhaust fan (L)
Exhaust fan (R)
R-DMD fan
Liquid cooling pump (G)
Liquid cooling pump (B)
Color prism fan
Lamp prism fan
Ballast fan 2
Ballast fan 4
LAMP monitor blinks 3 times in
red.
LAMP monitor blinks 3 times in
red.
for PT-D10000*
for PT-DW10000*