Labels & Cosmetics - Grizzly G0531B Owner's Manual

216V2
MODEL G0531B
21" 5 HP HEAVY-DUTY BANDSAW
w/MOTOR BRAKE
WARNING!
Specifications
Motor: 5 HP, 230V, Single-Phase, 60 Hz To reduce risk of serious injury when using this machine:
Full-Load Amp Draw: 22A 1. Read and understand owner's manual before operating.
Table Size: 29-1/2" x 20-3/4" 2. Never touch moving blade—keep hands out of blade path.
Blade Speed: 4600 FPM 3. Always wear approved eye protection and respirator.
Blade Length: 165" 4. Only plug power cord into a grounded outlet.
Blade Width Range: 1/4" – 1-3/8" 5. Only remove jammed cutoff pieces when blade is stopped.
Max. Cutting Width Left of Blade: 20" 6. Use push stick or holding jig to cut small or narrow pieces.
Max. Cutting Height: 14-1/4" 7. Disconnect power before changing blades or adjusting.
Table Tilt: 5˚L ⁄ 45˚R 8. Maintain adjustment of blade tension, tracking, & guides.
Weight: 594 lbs. 9. Keep upper guide adjusted to just clear the workpiece.
10. Hold workpiece firmly against table to maintain control.
11. Only run saw with wheel covers closed & all guards in place.
12. Never reach under table while blade is in motion.
Date
13. Secure/remove loose clothing and long hair.
14. DO NOT expose to rain or use in wet locations.
SN 15. DO NOT operate under influence of drugs or alcohol.
Mfd. for Grizzly in Taiwan 16. Prevent unauthorized use by children or untrained users.
212
REF PART # DESCRIPTION
201 P0531B201 MODEL NUMBER LABEL (G0531B)
201 P0566B201 MODEL NUMBER LABEL (G0566B)
202 P0566B202 GRIZZLY LOGO PLATE
203 P0566B203 GLASSES/RESPIRATOR LABEL
204 P0566B204 DOOR CLOSED LABEL
206 P0566B206 READ MANUAL LABEL
207 P0566B207 ELECTRICITY LABEL
210 P0566B210 TOUCH-UP PAINT, GRIZZLY GREEN
Safety labels warn about machine hazards and ways to prevent injury. The owner of this machine
MUST maintain the original location and readability of the labels on the machine. If any label is
removed or becomes unreadable, REPLACE that label before using the machine again. Contact
Grizzly at (800) 523-4777 or www.grizzly.com to order new labels.
Model G0531B/G0566B (Mfd. Since 09/18)
Labels & Cosmetics
G0566B
G0566B
MODEL G0531B
21" 5 HP HEAVY-DUTY BANDSAW
w/MOTOR BRAKE
Specifications WARNING!
Motor: 5 HP, 230V, Single-Phase, 60 Hz To reduce risk of serious injury when using this machine:
Full-Load Amp Draw: 22A 1. Read and understand owner's manual before operating.
Table Size: 29-1/2" x 20-3/4" 2. Never touch moving blade—keep hands out of blade path.
Blade Speed: 4600 FPM 3. Always wear approved eye protection and respirator.
Blade Length: 165" 4. Only plug power cord into a grounded outlet.
Blade Width Range: 1/4" – 1-3/8" 5. Only remove jammed cutoff pieces when blade is stopped.
Max. Cutting Width Left of Blade: 20" 6. Use push stick or holding jig to cut small or narrow pieces.
Max. Cutting Height: 14-1/4" 7. Disconnect power before changing blades or adjusting.
Table Tilt: 5˚L ⁄ 45˚R 8. Maintain adjustment of blade tension, tracking, & guides.
Weight: 594 lbs. 9. Keep upper guide adjusted to just clear the workpiece.
10. Hold workpiece firmly against table to maintain control.
11. Only run saw with wheel covers closed & all guards in place.
12. Never reach under table while blade is in motion.
Date 13. Secure/remove loose clothing and long hair.
14. DO NOT expose to rain or use in wet locations.
SN 15. DO NOT operate under influence of drugs or alcohol.
16. Prevent unauthorized use by children or untrained users.
Mfd. for Grizzly in Taiwan
REF PART # DESCRIPTION
212 P0566B212 TOUCH-UP PAINT, GREY PUTTY
213 P0566B213 DISCONNECT POWER LABEL
215 P0566B215 TENSION ADJ LABEL
216V2 P0531B216V2 MACHINE ID LABEL V2.09.18 (G0531B)
216V2 P0566B216V2 MACHINE ID LABEL V2.09.18 (G0566B)
218 P0566B218 TABLE LOCK LABEL
220 P0566B220 MAGNETIC BRAKE NOTICE
221 P0566B221 GRIZZLY.COM LABEL
BUY PARTS ONLINE AT GRIZZLY.COM!
Scan QR code to visit our Parts Store.
210
-21-