Elation Fuze SFX User Manual page 18

I N S T A L L A T I O N G U I D E L I N E S
OMEGA BRACKETS INSTALLATION
Insert the Omega Brackets into the matching holes on the bottom of the fixture. Secure the
Omega Brackets to the fixture by turning each quick-lock fastener ¼ turn clockwise; making
sure the fastener is completely locked. Omega Brackets can be installed into the fixture base
as illustrated below.
1
2
CLAMP INSTALLATION
When mounting fixture to truss, be sure to secure an appropriately rated professional grade
rigging clamp to the included Omega Brackets using an M10 screw fitted through the
center hole of the Omega Brackets. The fixture provides a built-in rigging points for a
SAFETY CABLE. Be sure to only use one of the designated rigging points for the safety
cable and never secure a safety cable to a carrying handle.
RIGGING
Overhead rigging requires extensive experience, including calculating working load limits,
understanding of the installation material being used, and periodic safety inspection of all
installation material and the fixture, among other things. If you lack these qualifications, do
not attempt the installation yourself. Improper installation can result in bodily injury.
ALWAYS ATTACH AN APPROPRIATELY RATED SAFETY CABLE (NOT INCLUDED)
THAT MEETS ALL LOCAL, NATIONAL, AND COUNTRY CODES AND REGULATIONS
WHENEVER INSTALLING FIXTURE IN A SUSPENDED ENVIRONMENT!
3
18
4
SAFETY CABLE
5