Gobo Installation - Elation Fuze SFX User Manual

G O B O I N S T A L L A T I O N
1. Place the fixture on a stable flat surface in a DUST-FREE, INDOOR location, and
ensure that the unit has been disconnected from power and given at least 15
minutes to cool down after powering down. Engage both the Pan Lock (location
shown at above left) and the Tilt Lock (location shown at above right). For the
purposes of this procedure, we will assume that the head has been fixed in an upright
position with the lens oriented upwards.
2. Use a Phillips head screwdriver to loosen the four (4) fasteners on each of the covers.
Please note that these fasteners are of the twist-lock variety, and do not come
free of the covers. Remove the safety cable clips securing each cover to the fixture.
13