5 Development Platform Quick Start
5.1 Tools Setup Sequence
Start the debugging system in the following sequence:
Select mode switch on Easy EV-Board to debug mode;
Connect Easy Kit to PC USB interface;
The Easy Kit will be recognized as "BGM Adaptor (MB2146-08)" in Windows.
5.2 Open Project and Start Debug
Users can start debug from SOFTUNE in the following sequence. Here take IO_LED project
for example.
Start the SOFTUNE
SOFTUNE Workbench from Start Menu in Windows;
Click Open Workspace from File Menu in SOFTUNE;
Select IO_LED.wsp in Open Space window;
Click Start Debug from Debug Menu.
If the entire procedure goes right, a debug will start normally.
5.3 Operation Precautions
All pins of MB95200 Series MCU are directly connected to Easy EV-board 20 pin
interface. If the user wants to connect these pins out, it's recommended to add terminal
resistors in series with the pins.
Easy Kit FMCDC-MB95260H-EK-01 V1.2
Chapter 5 5BDevelopment Platform Quick Start
by selecting Program > SOFTUNE V3> FFMC-8L Family
MCU-AN-500059-E-12 – Page 18