Table of Contents
Advertisement
3.
Remove the camera cover ring from the camera.
Using the hex wrench provided, unscrew the hex head screw located under
the small flap on the cover.
Using a flathead screwdriver, release the two clips on the base of the
camera to release the cover.
Grasp the opening on the side of the cover, and pull the cover and base
apart to open the camera.
Note: For further information on removing the cover ring from the camera,
please refer to the guide, "Instructions to remove the 360° camera cover".
4.
Connect the cables to the camera.
Installation Manual
7
Advertisement
Table of Contents
