Siemens FN2012-A1 Mounting & Installation page 11

Ethernet-switch (modular)

Hide thumbs Also See for FN2012-A1:

Table of Contents

Building Technologies

Siemens Industry, Inc.

1. Position the Ethernet module (4) as shown.

2. Slide the Ethernet module (4) into the opening of the option slot so that the plug

contacts (5) slot into the Ethernet switch plug connector.

3. Make sure that the Ethernet module (4) slots into the positioning aids (7).

4. Use the fastening screw (3) to fix the Ethernet module in the threaded hole (6).

5. Wire up the Ethernet module according to the wiring information provided below.

Table of Contents