Roland VersaSTUDIO BN-20 Switching Manual page 17

When a printer that does not use MAX 3 ink is connected to VersaWorks
2.
Temporarily delete the printer that has been switched to MAX 3 ink from VersaWorks.

Start VersaWorks.



When the screen shown in the figure is
displayed, click [OK].
The [Printer Settings] screen will appear.
Select a printer that has been switched to
MAX 3 ink under [Printer List], and then
click .
When the screen shown in the figure ap-
pears, confirm that you want to delete the
selected printer, and then click [Yes].
The selected printer is deleted from the [Printer
List].
ECO-SOL MAX 3 Ink Switching Method
Switching the Ink
17