Advertisement
To program the timer system, all eight timing channels
1
must be idle with the displays showing "- - - -". Press
and hold the PRINCE CASTLE logo button for 6-8 secs.
to enter the programming mode. The displays all change
from "- - - -" to "PRGM". You are now ready to
individually program each of the eight channels.
Use the UP ARROW or DOWN ARROW buttons to scroll
3
through to the desired duty function for this channel.
Holding down either the UP ARROW or DOWN ARROW
buttons automatically scrolls through the possible
selections.
TIME: If the countdown time value for this duty function
5
is to be programmed, press the button next to the
display showing "TIME". The currently programmed
countdown time value for this duty function shows only
in the display of the selected channel.
To change the programmed time for the selected
channel, press the UP ARROW button to increase the
programmed time or press the DOWN ARROW button to
decrease the programmed time. Holding down the UP
ARROW or DOWN ARROW buttons automatically
increases or decreases the programmed time.
When the desired time is showing in the channel display
press the button next to the display showing "TIME" to
save the value.
To exit without saving the new time value press the
PRINCE CASTLE logo button.
Time settings can be in Hours-Minutes (H:M) or
Minutes-Seconds (M:S). Each channel's display
has two LEDs to indicate the format of the
displayed time.
755-502revA
Programming
Briefly press the button for the timer channel to be
2
programmed. The LED indicator for the selected channel
turns red and a beep sounds. The display for only the
selected channel shows "DTY1" indicating that the first
duty function can be programmed. The LED indicators
next to each of the programmable features for this duty
function turn yellow.
Press one of the option buttons (noted with a yellow
4
LED) to select the feature to be programmed. The LED
indicator for the selected feature begins to flash, a
beep sounds, the LED indicators for the other features
turn off, and the associated displays go blank. The
display for only the selected channel shows the
currently programmed value for the selected feature.
To change the current value, use the UP ARROW
button or DOWN ARROW button to scroll through the
selections. Holding down either the UP ARROW or
DOWN ARROW buttons automatically scrolls through
the possible selections.
3
Multi-display 8-Channel Timer
Printed in USA 3/06 © 2006
755-HM8
Advertisement
