Installation; Programming - Prince Castle 840-T series Operating Instructions Manual

INSTALLATION

1. After you have removed the timer from the carton,
inspect the unit for signs of damage. If there is
damage to the unit:
Notify carrier within 24 hours after delivery.
Save carton and packing materials for inspection
purposes.
Contact your local dealer or, if purchased di-
rectly, the Prince Castle Customer Sales
Department at 1-800-722-7853 to arrange for
a replacement to be sent.
2. Verify that all parts have been received. Mounting
bracket and hardware are provided.
3. To mount the timer, place mounting brackets in de-
sired location. Scribe location of mounting holes,
center punch, and drill holes. Attach timer to mount-
ing brackets placing star washer between bracket and
timer.

PROGRAMMING

Note: The 6 following functions can be programmed
on each channel:
Total Cook Time: ( Factory Preset 3:00 Minutes)
1st Duty During Cook Time: (Factory Preset :30 Sec.)
2nd Duty During Cook Time:(Factory Preset 1:00 Min.)
3rd Duty During Cook Time:(Factory Preset 1:30 Min)
Hold Time: (Factory Preset 2:00 Minutes)
Duty During Hold Time: No Preset Time.
Each function programs in the same manner, first
setting the time, then setting the alarm cancel
mode (Automatic or Manual) and finally naming the
function.
1. To program, press and hold the PRINCE CASTLE
LOGO for eight seconds, a beep will sound and the
CHANNEL/FUNCTION DISPLAY will read SEL CH/
LOGO = QUIT.
SEL CH/LOGO = QUIT
Printed in USA 4/07 © 2007
2. Select and press the timer channel to be pro-
grammed. The LED indicator for the selected
button will turn yellow and a beep will sound. The
CHANNEL/FUNCTION display will read,
CKT=COOK TIME  with up and down arrows. The
current complete cook time (Factory Preset 3:00
M:S) for that channel will be displayed in the TIME
display, and the time value will indicate either H:M
or M:S.
3. At this point, program in your complete cook time
by using the SCAN/UP Arrow or the SCAN/DOWN
Arrow button. Once you have reached your de-
sired time press the ENTER button to store your
complete cook time. Note: The Enter button must
be pressed after any time changes in the cook,
duty or hold functions or the the time change will
not be stored.
IMPORTANT: To change from Minutes and Sec-
onds M:S to Hours and Minutes H:M. Press and
hold the SCAN/UP Button. When the display
reaches 59:59 it will automatically change to 1:00
Hour and the LED will switch from M:S to H:M.
The program value for the H:M indicator is from
1:00 hour to 17 hours: 59 minutes.
ENTER
2
CKT=COOK TIME
3 : 0 0
CKT=COOK TIME
6 : 0 0
ENTER
ENTER
840-507revC