Supported Device - Omron CJ Series Manual

6

Supported Device

Range of supported device address is shown in the table below. Please note that the actually supported range of
the devices varies depending on the External Device to be used. Please check the actual range in the manual of
your External Device.
Device
Channel I/O
Internal Auxiliary Relay
Special Auxiliary Relay
Latch Relay
Timer
(Time Up Flag)
Counter
(Count Up Flag)
Timer (Current Value)
Counter (Current Value)
Data Memory
Extension Data Memory
(E0-EC)
Extension Data Memory
(Current Bank)
Task Flag
(Bit)
Task Flag
(Status)
Index Register
Data Register
*1 Write disable in A000 to A447.
*2 Write disable
*3 When using the communication unit (CS1W-SCU21), do not use the address of D30000 to D31599. When using
the communication board (CS1W-SCU21/41), do not use the address of D32000 to D32767. These addresses
may be used as the system setting area on the External Device.
*4 Max 13 banks (E0 to EC) can be used. 1 bank can contain 32768 words. Available bank number is different
depending on the CPU unit.
*5 CJM1 Series does not include the extension data memory (E0 to EC, current bank EM).
*6 CJ Series does not include the extension data memory (current bank EM).
*7 You cannot write during RUN.
GP-Pro EX Device/PLC Connection Manual
Bit Address
0000.00-6143.15
W000.00-W511.15
A000.00-A959.15
H000.00-H511.15
T0000-T4095
C0000-C4095
-
-
D00000.00-D32767.15
E000000.00-
EC32767.15
-
TKB00-TKB31
TK00.00-TK31.07
-
-
This address can be specified as system data area.
Word Address
0000-6143
W000-W511
A000-A959
H000-H511
-
-
T0000-T4095
C0000-C4095
D00000-D32767
E000000-EC32767
EM00000-EM32767
-
TK00-TK30
IR00-IR15
DR00-DR15
35
CS/CJ Series HOST Link Driver
32bits Notes
*1
*2
*2
*3
*4*5
*5*6
*2
*2
*7
*7