Alpine PSU-300CVC Installation Manual page 6

Installation (continued)
3
Mount the subwoofer level remote with the provided
hook and loop adhesive tape in the center console
compartment as shown below. Route the cable to
the passenger side seat.
5
Lift the carpet near the front left screw of the
passenger side seat mounting area and remove any
paint to expose bare metal. Attach the Negative (-)
ground terminal of the main harness with the
provided wafer head screw and lock washer.
7
Route the main harness along the right side of the
center console towards the back of the radio.
Front of Vehicle
:MU-~
e
6/11
4
Connect the power cable to the main harness.
6
Connect the main harness and subwoofer level
remote cable to the amplifier assembly and align
the seat to the mounting holes. Note: Be sure to set
all audio settings as recommended according to
the corresponding system settings on pages 8, 9
and 10.