Safety Notes - Siemens SIMATIC NET SCALANCE XR-300M EEC Series Compact Operating Instructions

Industrial ethernet switch
Table of Contents

Advertisement

Safety notes

Read the safety notices
Note the following safety notices. These relate to the entire working life of the device.
You should also read the safety notices relating to handling in the individual sections,
particularly in the sections "Installation" and "Connecting up".
To prevent injury, read the manual before use.
Safety notices on use in hazardous areas
General safety notices relating to protection against explosion
EXPLOSION HAZARD
Do not open the device when the supply voltage is turned on.
Safety notices when using the device according to Hazardous Locations (HazLoc)
If you use the device under HazLoc conditions you must also keep to the following safety
notices in addition to the general safety notices for protection against explosion:
This equipment is suitable for use in Class I, Division 2, Groups A, B, C and D or non-hazardous
locations only.
This equipment is suitable for use in Class I, Zone 2, Group IIC or non-hazardous locations only.
SCALANCE XR-300M EEC
Compact Operating Instructions, 11/2019, A5E02661176-14
CAUTION
WARNING
2
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simatic net scalance xr324-4m eec

Table of Contents