Replacing The Print Heads - Pitney Bowes Connect+ Series Operator's Manual

Hide thumbs Also See for Connect+ Series:

Table of Contents

9. Check the test sample. If the lines are solid and unbroken, the sample is acceptable. Select Image

is OK - Done.

Replacing the print heads

If you have cleaned the print head and changed the ink cartridge and the print quality of the test sample is

still not satisfactory, replace the print head.

1. Select the Settings button in the Mailing tile on the Home screen.

2. Select Hardware.

3. Select Printer.

4. Select the Print head tab.

5. Select the Install new print head... button.

6. Open the printer cover.

Pitney Bowes

Connect+ Series Operator Guide

Page 333 of 367