Advertisement
Front
(Fig 10) Attach top of Bracket to top of frame
Front
(Fig 12) Reuse factory hardware to
attach tow hook to mount on Bracket
(Fig 14) Attach Bumper to side of Bracket
(driver/left side pictured from behind bumper)
Driver/left Side Installation Pictured
(4) 12mm x 50mm Hex Bolts
(8) 12mm Flat Washers
(4) 12mm Lock Washers
(4) 12mm Hex Nuts
Front
Front
(Fig 11) Attach top of Bracket to top of frame
WARNING! Do not crawl under bumper
unless the bumper is properly supported on
blocks or stands or the bumper may fall.
(3) 12mm x 50mm Hex Bolts
(6) 12mm Flat Washers
(3) 12mm Lock Washers
(3) 12mm Hex Nuts
(Fig 13) Attach Bumper to side of Bracket
Page 5 of 6
ELEVATION FRONT BUMPER
2017 FORD SUPER DUTY F250-350
Front
10/2716 (DP)
Advertisement
