Advertisement
Quick Links
Advertisement
Related Manuals for Steelcraft 60-11380
Summary of Contents for Steelcraft 60-11380
-
Page 1: Installation Instructions
INSTALLATION INSTRUCTIONS ELEVATION FRONT BUMPER 2017 FORD SUPER DUTY F250-350... -
Page 2: Parts List
ELEVATION FRONT BUMPER 2017 FORD SUPER DUTY F250-350 PARTS LIST: Elevation Front Bumper Assembly 12mm x 32mm x 3mm Flat Washers Driver/left Frame Bracket 12mm Lock Washers Passenger/right Frame Bracket 12-1.75mm Hex Nuts Plastic Plugs for license plate mount 8-1.25mm x 20mm Hex Bolts Driver/left Upper U-Bracket (OEM fog light) 8mm x 24mm x 2mm Flat Washers Passenger/right Upper U-Bracket (OEM fog light) - Page 3 ELEVATION FRONT BUMPER 2017 FORD SUPER DUTY F250-350 5. Select the driver/left Frame Bracket. Slide the Bracket over the end of the frame. Line up the slots in the sides of the Bracket with the holes in the frame. Select (4) 12mm Bolt Plates. Insert the Bolt Plates into the open end of the frame and out through the Bracket.
- Page 4 ELEVATION FRONT BUMPER 2017 FORD SUPER DUTY F250-350 Lower frame extension (Fig 1) On models with fog lights, unplug wire harness from back of light (Fig 2) Release clips attaching the wire harness for fog lights if equipped (driver side) (Fig 3) Remove plastic air dam from bumper Front (Fig 4) Remove outer bumper support...
- Page 5 ELEVATION FRONT BUMPER 2017 FORD SUPER DUTY F250-350 Driver/left Side Installation Pictured WARNING! Do not crawl under bumper unless the bumper is properly supported on blocks or stands or the bumper may fall. Front (Fig 6) Remove bumper bolts (driver side pictured) (Fig 7) Remove tow hook assembly and lower frame extension (not pictured-see Fig 2) (4) 12mm Flat Washers...
- Page 6 ELEVATION FRONT BUMPER 2017 FORD SUPER DUTY F250-350 Driver/left Side Installation Pictured (4) 12mm x 50mm Hex Bolts (8) 12mm Flat Washers (4) 12mm Lock Washers (4) 12mm Hex Nuts Front Front (Fig 10) Attach top of Bracket to top of frame (Fig 11) Attach top of Bracket to top of frame WARNING! Do not crawl under bumper Front...
- Page 7 ELEVATION FRONT BUMPER 2017 FORD SUPER DUTY F250-350 Driver/left Side Installation Pictured 8mm x 20mm Hex Bolt (2) 8mm Flat Washers 8mm Nylon Lock Nut Front (Fig 15) Push plastic plugs into holes in Bumper for license plate if required Front (Fig 16) Optional OEM fog light installation (light not included).