Advertisement
(Fig 6) Remove bumper bolts (driver side pictured)
Front
(Fig 8) Insert Bolt Plates into open end of
frame. Attach Bracket to sides of frame
Driver/left Side Installation Pictured
(4) 12mm Flat Washers
(4) 12mm Lock Washers
(4) 12mm Hex Nuts
(4) 12mm Bolt Plates
2017 FORD SUPER DUTY F250-350
WARNING! Do not crawl under bumper
unless the bumper is properly supported on
blocks or stands or the bumper may fall.
Front
(Fig 7) Remove tow hook assembly and lower
frame extension (not pictured-see Fig 2)
(Fig 9) Insert Bolt Plates into open end of
frame (driver/left frame Bracket pictured)
Page 4 of 6
ELEVATION FRONT BUMPER
Front
10/2716 (DP)
Advertisement
