Dismantling The Appliance - Rinnai Symmetry RDV3611 Maintenance Instructions Manual

Dismantling the appliance

Before commencing any maintenance work, ensure the gas and power supplies to
the appliance are disconnected. Also read these instructions to get an overview of the
IMPORTANT
steps required before starting any maintenance work. There are a number of checks
that need to be performed as the appliance is dismantled.
1. Remove outer frame and lift off magnets.
3. Remove log set.
5. Remove upper and lower brackets, and
unclip control switch.
7. Remove left and right ceramic panels (if
installed), and top panel.
6 | Symmetry Maintenance Instructions: 11699-B 02-12 01-12
2. Remove glass frame.
4. Remove pilot shield.
6. Carefully lift out burner bed, hold as
shown.
8. Remove back ceramic panel (if installed).