Control Panel Installation; Installing The Enclosure; Installing The Control Panel - Bosch B9512G Installation Manual

8 en | Control panel installation
3

Control panel installation

Refer to Enclosures to determine if the application requires a specific enclosure.
Enclosure and control panel (back view) overview
Callout ᅳ Description
1 ᅳ Hooks to attach the mounting skirt (2)
2 ᅳ Three-hole pattern for mounting modules (4)
3 ᅳ Mounting location for the tamper switch
4 ᅳ Mounting skirt screw location
3.1

Installing the enclosure

Notice!
Electromagnetic interference (EMI)
EMI can cause problems on long wire runs.
1.
2.
3.
4.
3.2

Installing the control panel

1.
2.
3.
4.
2019-12 | 06 | F.01U.304.001
Remove the knockouts.
Mount the enclosure. Use all enclosure mounting holes. Refer to the mounting
instructions supplied with the selected enclosure.
Pull the wires into the enclosure through the knockouts.
Position the supplied point label chart on the inside of the enclosure door (optional).
Position the control panel over the inside back of the enclosure.
Align the Holes to attach the mounting skirt to hooks with the hooks.
Slide the control panel down so that it hangs on the hooks.
Secure the mounting skirt screw.
Callout ᅳ Description
5 ᅳ Enclosure mounting holes (5)
6 ᅳ Holes to attach the mounting skirt to hooks (2)
7 ᅳ Tab to secure the mounting skirt
UL Installation manual
Control panels
Bosch Security Systems B.V.