Control Panel - Yamaha YC Series Owner's Manual

Control Panel

Function name
Panel Lock Live Set
Settings
Organ/Keys
Effect/Sp Amp/Reverb
Master EQ
Display Lights Section
Ins Effect
LCD SW
LCD Contrast
Advanced Settings Drawbar Mode
Section Hold
Live Set View Mode
Value Indication
SW Direction
Description
Determines whether the panel lock for each of the categories listed at left are
enabled (On) or disabled (Off).
Default:
On
Determines whether the indicator lamps of each Section are always lit ("On")
regardless the status of the corresponding Section [ON/OFF] switch.
Default: Off
NOTE
When "MIDI Control" is set to "On" and the parameter is changed using the operator
whose lamp is lit, the corresponding Control Change message is transmitted (page 37).
Determines whether the lamps in the EFFECT 1 and 2 areas of the Key A/Key B
Sections are always lit ("On") regardless the status of each of the EFFECT 1/2
[ON/OFF] buttons.
Default: Off
NOTE
When "MIDI Control" is set to "On" and the parameter is changed using the operator
whose lamp is lit, the corresponding Control Change message is transmitted (page 37).
Determines whether to display (On) or not display (Off) the Top screen in the
LCD. The various setting screens such as the MENU screens and the SETTINGS
screens are always shown regardless of this setting.
Default:
On
For adjusting the contrast of the LCD.
Settings:
1 – 63
Default:
32
Sets the conditions for a drawbar position to be reflected when the drawbar's
actual position and the LED display (setting called up) do not match.
When this is set to "Jump," the position of a drawbar is unconditionally reflected
when that drawbar is moved.
When this is set to "Catch," the current setting will be held until the drawbar's
position matches (catches) the LED display. Once they have matched, the
drawbar's position will be reflected.
Default:
Jump
When this is set to "Enable," you can select another Live Set Sound and still
maintain (hold) the current settings of the desired Sections.
Push and hold the Section [ON/OFF] switch of a Section you want to maintain
the settings of until the corresponding lamp flashes to put that Section in the
Hold status. To release Section Hold, push the Section [ON/OFF] switch again.
For example, to keep reverb settings during your performance regardless of the
Live Set Sounds you change, set this item to "Enable" and then push and hold the
REVERB Section [ON/OFF] switch.
Default:
Disable
Determines whether to maintain the Live Set View (Keep) or automatically
return to the Top screen (Close) when switching between Live Set Sounds.
When this is set to "Keep," the names of eight sets of Live Set Sounds are always
displayed.
Default:
Close
Determines whether to show (On) or not show (Off) the values on the LCD
when the values for the knobs of each Section are changed.
Default: On
Determines whether to operate the Voice selection switch and the Effect type
selection switches in ascending order (Default) or in descending order (Reverse).
Default: Default
MENU LIST
39
YC61 Owner's Manual