Yamaha YC Series Owner's Manual page 38

MENU LIST
Function name
Keyboard/ Octave
Pedal
Transpose
Touch Curve
Fixed Velocity
Sustain Pedal Type
Foot Switch Assign
Local Control
I/O Volume USB Audio
Output
Auto Power Off
38
YC61 Owner's Manual
Description
Shifts the octave range of the keyboard up or down.
Settings: -3 – +3
Default:
+0
Transposes the pitch of the keyboard up or down in semitones.
Settings: -12 – +12
Default:
+0
Determines how actual velocities will be generated according to the strength
with which you play notes on the keyboard (page 11).
Settings:
Normal, Soft, Hard, Wide, Fixed
Default: Normal
Set this parameter to produce the same velocity, regardless of how hard or soft
you play the keyboard. This parameter is only used when "Touch Curve" is set to
"Fixed."
Settings: 1 – 127
Default:
64
Determines which type of sustain pedal is connected to the FOOT SWITCH
[SUSTAIN] jack. Select "FC3A (HalfOn)" when you want to use a pedal with a
Half Damper function.
Settings: FC3A (HalfOn), FC3A (HalfOff), FC4A/FC5
Default:
FC3A (HalfOn)
Determines the Control Change number generated by using the Footswitch
connected to the FOOT SWITCH [ASSIGNABLE] jack.
Default:
Live Set +
Determines whether Local Control is on or off.
When this is set to "Off," this instrument's tone generator is internally
disconnected from the keyboard and controllers, and no sound will be produced
when the keyboard is played. However, regardless of the setting here,
performance information from this instrument's keyboard and controllers is
transmitted as MIDI messages, and this instrument's tone generator will
continue to produce sound in response to the MIDI messages received from
MIDI input, depending on the MIDI settings.
Default:
On
Determines the volume of USB Audio input.
Settings: 0 – 127
Default:
64
Adjusts the final output sound level of the instrument.
Settings: -24 dB – +0 dB – +24 dB
Default:
-6 dB
Determines whether to set the Auto Power Off function to "Enable" or "Disable."
Default: Disable