Roland Jupiter-Xm Reference Manual page 41

06
How many hours can I continue to use the unit
on battery power?
Approximately 3.5 hours (when using nickel-metal hydride batteries with
1,900 mAh capacity).
However, the usable time might decrease depending on the volume of the
internal speakers.
Operating the Unit
08
Why do the panel knobs and buttons work
sometimes and not at other times?
The parameters are different for each model, so there are cases in which
a controller has no parameter. Since the controllers without a parameter
differ between models, a controller might or might not have an effect.
The parameter that is controlled by each knob or button will differ
depending on the model used by the tone that's assigned to the current
part (the currently selected part).
&
"Correspondence Between Controllers and Parameters"
09
Is there a way to move quickly to the edit
screen for the parameter controlled by each
knob?
Yes.
1 .
Hold down the [SHIFT] button
parameter that you want to edit .
The setting screen appears.
&
"List of SHIFT Operations (Shortcuts)"
10
Is there a way to check the current value of
a setting without affecting the state of the
sound?
Yes.
1 .
Hold down the [EXIT] button
want to check .
The current value of the setting is shown.
11
Is there a way to quickly change the
PORTAMENTO TIME?
Yes.
1 .
While the [FUNCTION] button
hold down the [SHIFT] button
button .
The PORTAMENTO TIME setting screen appears.
2 .
Use knob [2] to edit the PORTAMENTO TIME .
(p. 16)
and turn the knob of the
(p. 30)
and operate the knob that you
(or the [PART] button) is lit,
and press the [PORTAMENTO]
07
Do the internal speakers produce enough
volume for a live performance?
They are not suitable for this purpose.
The internal speakers are intended for personal enjoyment by the
individual who is playing the instrument. For use in a live performance, we
recommend that you connect an external amp or speaker.
12
The part on/off button is lit, but I can't play the
sound of that part from the keyboard.
(Buttons [6]–[9] when the [PART] button is lit)
This might be due the following reasons.
5 The part might be assigned for arpeggio performance
5 The I-ARPEGGIO [ON/OFF] button is ON, and the ARPEGGIO PART EDIT parameter Switch
is "ON" or "KEYSW"
&
"If the keyboard does not play sound"
13
Is there a way to move quickly to the TONE
(PARTIAL) edit screen?
Yes.
1 .
When the [FUNCTION] button
button and press a [1]–[4]
The edit screen for the corresponding tone or partial appears.
14
Is there a way to move quickly to the
assignment screen for the [SL1/2] sliders or [S1/
S2/S3] buttons?
Yes.
1 .
Hold down the [SHIFT] button
button that you want to assign .
The assignment screen for the corresponding controller appears.
15
Can I change the models or categories that are
recalled by the MODEL buttons [1]–[16]?
Yes.
1 .
Hold down the [MODEL BANK] button
button [1]–[16] .
The model or category recalled by the MODEL button can be specified
for each bank.
* Up to eight can be specified for each button (BANK).
(p. 10)
is lit, hold down the [SHIFT]
button .
and operate the slider or
and press a MODEL
Q&A
41