Accessing Sat From A Cli - Avaya G700 Welcome Manual

Access Procedures: Specific Access Procedures
Avaya™ Site Administration software can be accessed in a variety of ways:
1 . Make sure you have a valid physical connection from your computer to the S8300 Media Server,
or another Media Server (such as the S8700 Media Server) that is running MultiVantage
software.
2 . If Avaya™ Site Administration is installed on your computer, you can launch it in any of the
following ways:
- Click the Avaya™ Site Administration icon on your desktop.
- From the S8300 Media Server Web Interface main menu, click the Start ASA link.
- From the Device Manager interface, select the Launch ASA toolbar button or menu item.
- From the Avaya MultiService™ Network Manager, launch Avaya™ Site Administration.
3 . Log in to the MultiVantage
(such as cust or craft ).
4 . Enter your login confirmation information as prompted:
- Password prompt. Type your password in the Password field, and click Login or press Enter
again.
- ASG challenge. If your login is Access Security Gateway (ASG) protected, you will see a
challenge screen. Enter the correct response and click Login or press Enter.
5 . The Avaya™ Site Administration package opens. You can administer telephony features in two
main modes:
- Using the Graphically Enhanced Interface user interface
- Launching the system emulation program to use a CLI version

Accessing SAT from a CLI

The System Access Terminal (SAT) program can be accessed from a command line interface as follows:
1 . Make sure you have a valid Ethernet or serial connection from your computer to the S8300
Media Server, or another Media Server (such as the S8700 Media Server) that is running
MultiVantage
2 . If you already have a valid CLI connection in progress, access the SAT program by typing sat
or dsat. Go to step 4.
3 . If you are not yet logged in, open a telnet program on your computer. For example:
- On a Windows system, go to the Start menu and select Run .
- To log in directly to the SAT program, type telnet <IP address> 5023
4 . Log in to the MultiVantage
(such as cust or craft ).
5 . Enter your login confirmation information as prompted:
- Password prompt. Type your password in the Password field, and click Login or press Enter
again.
- ASG challenge. If your login is Access Security Gateway (ASG) protected, you will see a
challenge screen. Enter the correct response and click Login or press Enter.
36
TM software. At the Login prompt, type the appropriate user name
TM software.
software. At the Login prompt, type the appropriate user name
TM
Welcome to S8300/S8700 and G700
555-234-200 — Issue 2 — October 2002
TM