Where To Get Help - Epson Stylus Scan 2000 Manual

Paper does not feed into or eject from the Stylus Scan
properly
Follow the procedures outlined below to prevent problems when
feeding and ejecting paper from the document feeder.
A document is stuck in the Stylus Scan's document feeder
Note:
These procedures do not apply to paper jammed in the Stylus Scan's
paper feeder. The paper feeder is not used when scanning.
Preventing document jams
Make sure the Stylus Scan is placed far enough from walls and
equipment so that the document support is seated properly and
not pushed forward. Also make sure that there is no paper in the
document support to obstruct the movement of the original.
Check that the document support is installed correctly and that
the original can move freely on and off it.
Clearing a document jam
Turn off your Stylus Scan. Open the top cover and remove the
jammed paper. If any applications are still running, turn them off
before turning off the Stylus Scan.

Where to Get Help

If your EPSON Stylus Scan is not operating properly and you
cannot solve the problem using the troubleshooting information
provided in the EPSON Stylus Scan documentation, contact
customer support services for assistance.
Customer support will be able to help you much more quickly if
you give them the following information.
❏ Serial number of your EPSON Stylus Scan
(The serial number label is on the back of the EPSON Stylus
Scan.)
147