Scanning; Loading The Document - Epson Stylus Scan 2000 Manual

Scanning

Loading the Document

Follow the directions in this section to load documents into the
document feeder of your Stylus Scan. If you are scanning fragile
or thin media, see "Loading thin or fragile media" on page 81.
Loading normal media
Follow the steps below to load a document into the document
feeder.
1. Adjust the document edge guides so that distance between
them is slightly wider than the width of the document.
2. Hold the document you want to scan face down, and place
the top edge of the document between the document edge
guides.
80