Epson Stylus Scan 2000 Manual page 63

c
Caution:
❏ EPSON recommends the use of genuine EPSON ink
❏ Leave the old cartridge installed in the Stylus Scan until you
Note:
❏ You cannot continue printing with one ink cartridge empty, even if
the other cartridge still contains ink. Before printing, replace the
empty cartridge.
❏ In addition to the ink used during document printing, ink is
consumed during the print head cleaning operation and during the
self-cleaning cycle which is performed when the Stylus Scan is
turned on.
Note:
You can also replace an ink cartridge from your computer using the
Status Monitor. Click the How To button in the Status Monitor's
Printer Status window, then follow the on-screen instructions.
Replacing a color ink cartridge
To replace an ink cartridge using the EPSON Stylus Scan's control
panel, follow the steps below.
1. Make sure the Stylus Scan is on. The P power light should be
on, but not flashing.
2. Lower the output tray at the front of the EPSON Stylus Scan,
then open the front cover.
114
cartridges. Other products not manufactured by EPSON
may cause damage to your Stylus Scan not covered by
EPSON's warranties.
have obtained a replacement. Otherwise, ink remaining in
the print head nozzles may dry out.